Common Pressure Washer Parts: Simpson 3100 PSI Pressure Washer Parts

A Simpson 3100 PSI pressure washer comes with a lot of parts. Knowing each individual parts will allow you to make quick and easy replacements each time they become faulty.

If you own a house, then you probably have one of those powerful Simpson 3100 PSI pressure washers. Homeowners usually pressure wash their houses every once a year so that they can totally get rid of all the dirt or mold that grow around the house. You definitely need the best surface cleaner to get the job done.

Pressure washers are strong enough to wash away dirt, molds, and mildew
Pressure washers are strong enough to wash away dirt, molds, and mildew

Of course, people usually take their pressure washers for granted because it’s just hidden away there until it’s time to use it once again. However, regardless of how powerful a pressure washer is, it has to be maintained regularly, and its parts replaced from time to time as well.

That said, if you own a Simpson 3100 PSI pressure washer, knowing the different Simpson 3100 PSI pressure washer parts will help you know which one should be replaced in the future in the event your unit malfunctions.

These are some of the common Simpson 3100 psi pressure washer parts that you have to take note of:

1. Spray Gun

The spray gun is probably the part that you’re most familiar with because it is the part that shoots out water. Spray guns are controlled by a trigger that will shoot the water out when you press it. It is connected to the high-pressure hose which connects it to the pump.

A good spray gun will help you control the strength of the water coming out of your unit.
A good spray gun will help you control the strength of the water coming out of your unit.

2. High-Pressure Hose

As mentioned above, the high-pressure hose is connected to the spray gun. It is what brings the water from the tank to the gun, and it’s also one of the parts that force water out of the tank.

3. Wands

Wands, or lances as other people call them, are the long sticks that you connect to the end of your spray gun. They are used to help push the flow of water in one direction, allowing sprayed water to have more impact on the surface you’re cleaning.

Pressure washer wands help direct water to the direction you are pointing
Pressure washer wands help direct water to the direction you are pointing

4. Spray Tip

Spray tips go on the ends of the wands or lances. While a wand sprays water in one direction, it is the spray tip that concentrates it in a straight line to create more pressure on the flow of water. This allows you to reach further distances when you spray.

There are various spray tips that allow various angles for spraying. All you have to do is choose the one you need.

5. Ball Valves

The ball valves help you temporarily stop the flow of water without having to shut the whole unit off. This allows you to quickly switch spray guns and wands with ease.

6. Adaptors

Adaptors, likewise known as fittings, are the connectors of the various parts of the pressure washer. They are used to connect the hose to the gun, hose to the pump, or the spray tip to the wand.

That said, there are different types of adaptors out there for you to use depending on which two parts you need to connect. Adaptors are important because they keep the pressure washer intact. Keep in mind that a worn out adaptor may badly affect the connection of two parts.

7. Pumps

Lastly, the pump is what would push the water from the tank to the hose. It gives water the first amount of pressure by pushing it out and letting it go through the hose to reach the gun. Without a good pump, the pressure washer won’t even work.

Conclusion

There you have it: the different parts of a Simpson 3100 pressure washer. It’s crucial that you know the different parts of a pressure washer so that you can pinpoint what needs fixing in case your pressure washer won’t work.